One-Touch Speed Dialling; Storing Numbers For One-Touch Speed Dialling - Canon Fax-L260i User Manual

One-Touch Speed Dialling

Storing Numbers for One-Touch Speed Dialling

Your FAX-L260i can store up to 16 of your most frequently dialled numbers under
one-touch speed dialling buttons. Follow this procedure to store one-touch speed
dialling numbers and names.
If the receiving fax (G3 or G4 standard) is connected to an ISDN line, set the TX
MODE to G4/G3. If it is a G3 fax connected to a normal telephone line, set the TX
MODE to G3. (You can still use G4/G3 mode but G3 mode has a simpler, and
therefore quicker, connection procedure.)
If the receiving fax supports the ITU-T standard, you can set One-touch Speed
Dialling numbers for fax transmission and set an ITU-T subaddress and password.
The ITU-T subaddress and password serve the same purpose as the bank account
number and a personal identification number on your bank card. Just as you cannot
complete a bank transaction without your account number and your personal
identification number, you cannot send or receive password/subaddress protected
documents if the subaddress and password do not match.
1. Press FUNCTION.
2. Use
3. Press START/COPY twice.
Chapter 4
or to select TEL REGISTRATION.
FUNCTION
TEL REGISTRATION
1-TOUCH SPD DIAL
01=
Speed Dialling 4-3