Touch Board - HP Pavilion x2 Detachable Maintenance And Service Manual

Touch board

Description
Touch board (includes cable)
Before removing the touch cable, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
5. Remove the battery (see
Remove the touch cable:
1. Remove the tape (1) covering the ZIF connector.
2. Release the ZIF connector (2) to which the touch cable is attached, and then disconnect the touch board
from the display panel assembly.
3. Remove the touch cable (3).
Back cover on page 23).
Battery on page 25).
Spare part number
814725-001
Touch board 29