Before removing the POGO connector, follow these steps:
1.
Remove the tablet from the keyboard (see
then remove the following components:
a.
Keyboard base (see
b.
Hard drive (see
c.
Keyboard board (see
d.
TouchPad (see
e.
Hinge cover (see
2.
Remove 2 screws from the POGO connector(1) , and then remove the POGO cable (2) to remove it.
Reverse this procedure to install the POGO connector.
Releasing the tablet from the keyboard base on page
Keyboard base on page
Hard drive (select products only) on page
Keyboard board on page
TouchPad on page
43).
Hinge cover on page
44).
40).
41).
43).
22), and
POGO connector
47