Webcam module
Description
Webcam module with microphone (includes cable and double-sided adhesive)
Before removing the webcam module, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
a.
Battery (see
b.
Audio jack board (see
c.
Speakers (see
d.
Touch board (see
e.
System board (see
f.
Wireless antenna (see
g.
Power/volume button board (see
Remove the webcam module:
1.
Release the ground tape (1) that secures the webcam module to the display panel assembly.
2.
Detach the microphones (2) from the display panel assembly. (The webcam module cable is attached to
the display panel assembly with double-sided adhesive.)
3.
Remove the broad head screw (3) that secures the webcam module to the display panel assembly.
36
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Back cover on page
Battery on page
25)
Audio jack board on page
Speakers on page
27)
Touch board on page
System board on page
Wireless antenna on page
Power/volume button board on page
23), and then remove the following components:
26)
29)
30)
33)
Spare part number
833626-001
34)