Yamaha PSR-S750 Reference Manual page 15

CONTROLLER Page
MODULATION
The MODULATION wheel can be used to modulate the parameters below as well as the pitch (vibrato).
Here, you can set the degree to which the MODULATION wheel modulates each of the following
parameters.
[2 ] FILTER
[3 ] AMPLITUDE
[5 ] LFO PMOD
[6 ] LFO FMOD
[7 ] LFO AMOD
SOUND Page
FILTER
Filter is a processor that changes the timbre or tone of a sound by either blocking or passing a specific
frequency range. The parameters below determine the overall timbre of the sound by boosting or cutting a
certain frequency range. In addition to making the sound either brighter or mellower, Filter can be used to
produce electronic, synthesizer-like effects.
[1 ] BRIGHT
(Brightness)
[2 ] HARMO.
(Harmonic Con-
tent)
Determines the degree to which the MODULATION wheel modulates the
Filter Cutoff Frequency. For details about the filter, see below.
Determines the degree to which the MODULATION wheel modulates the
amplitude (volume).
Determines the degree to which the MODULATION wheel modulates the
pitch, or the vibrato effect.
Determines the degree to which the MODULATION wheel modulates the
Filter modulation, or the wah effect.
Determines the degree to which the MODULATION wheel modulates the
amplitude, or the tremolo effect.
Determines the cutoff frequency or
effective frequency range of the fil-
ter (see diagram). Higher values
result in a brighter sound.
Determines the emphasis given to
the cutoff frequency (resonance),
set in BRIGHT. above (see dia-
gram). Higher values result in a
more pronounced effect.
Volume
Cutoff Frequency
These frequencies are Cutoff
"passed" by the filter. range
Volume
PSR-S950/S750 Reference Manual
1
Frequency
(pitch)
Resonance
Frequency (pitch)
15