Yamaha PSR-S750 Reference Manual page 36

2 DYNAMICS
This changes the velocity/volume (or accent) of certain notes in the Style playback. The Dynamics settings
are applied to each channel or all channels of the Section selected on the BASIC page.
[1
[2
[3
[4
[6
[7
2
[8
2
Press the [D] (EXECUTE) button to actually enter the edits for each display.
The values which are shown in the STRENGTH, EXPAND/COMP. and BOOST/CUT parameters are
expressed as a percentage of the last set value.
After the operation is completed, this button changes to "UNDO," letting you restore the original data if
you are not satisfied with the Groove or Dynamics results. The Undo function only has one level; only the
previous operation can be undone.
36
PSR-S950/S750 Reference Manual
]/ CHANNEL Selects the desired channel (part) to which Dynamics is to be applied. The
] selected channel is shown at the upper left of the display.
]/ ACCENT TYPE Determines the type of accent applied—in other words, which notes in the
] part(s) are emphasized with the Dynamics settings.
] STRENGTH Determines how strongly the selected Accent Type (above) will be
applied. The higher the value, the stronger the effect.
] EXPAND/ Expands or compresses the range of velocity values. Values higher than
COMP. 100% expand the dynamic range, while values lower than 100% compress
it.
] BOOST/CUT Boosts or cuts all velocity values in the selected section/channel. Values
above 100% boost the overall velocity, while values below 100% reduce
it.