Song Playback Related Parameters (Repeat Settings, Channel Settings, Guide Function) - Yamaha PSR-S750 Reference Manual

Song Playback Related Parameters (Repeat settings, Channel
settings, Guide Function)
The instrument has a variety of Song playback functions—repeat playback, various guide settings, etc.—
which can be accessed in the display below.
Call up the operation display.
[FUNCTION]
3
[A]/[B]
[H]
[I]
[1
[2
[3
48
PSR-S950/S750 Reference Manual
[B] SONG SETTING
GUIDE MODE See
REPEAT MODE Determines the method of repeat playback.
OFF
Plays through the selected Song, then stops.
SINGLE
Plays through the selected Song repeatedly.
ALL
Continues playback through all the Songs in the specified folder repeat-
edly.
RANDOM
Continues playback at random through all the Songs in the specified
folder repeatedly.
PHRASE MARK This parameter is available only when the current Song contains Phrase
REPEAT Marks, which specify certain locations (of several measures each) in the
Song. When this is set to ON, the section corresponding to the Phrase
Mark (specified via the SONG [G] (REW) and [H] (FF) buttons) is
played back repeatedly. Note that this parameter can be set only when the
Song playback is stopped.
] TRACK 2 These parameters determine which MIDI channel in the Song data is
assigned to the Left- or Right-hand part of the Guide function and the
] TRACK 1
Song Score function. In addition, the setting here also determines what
channels are assigned to the [TR1] and [TR2] buttons.
] AUTO CH SET When set to "ON," this automatically sets the proper MIDI channels for
the Right- and Left hand parts pre-programmed in the commercially avail-
able Song data. Normally, this should be set to "ON."
page 49.