Setting Up The Vocal Harmony Control Parameters - Yamaha PSR-S750 Reference Manual

Setting up the Vocal Harmony Control Parameters

You can set which part controls the Vocal Harmony regardless of the current Vocal Harmony Type.
1
Call up the Vocal Harmony Type Selection display.
[MIC SETTING/VOCAL HARMONY]
Check that the microphone is properly connected (Owner's Manual, chapter 8) and the settings (Reference Manual,
NOTE
setting the Vocal Harmony Control parameters here.
2
Press the [8 ] (SETUP) button to call up the Setup display, then set the value by
using the [2 ]–[5
For information on each parameter, see
3
After you finish setting the value, press the [EXIT] button to close the Setup display.
[D]/[E] TYPE SELECT
] and [7 ] buttons.
page 86.
page 82) are adjusted correctly before
PSR-S950/S750 Reference Manual
8
85