Pc Health Status; Frequency/Voltage Control - Syntax SVX400 User Manual

PC Health Status

On mainboards that support hardware monitoring, this item lets you monitor
the parameters for critical voltages, critical temperatures, and fan speeds:
Phoenix – AwardBIOS CMOS Setup Utility
Shutdown Temperature
CPU VCORE
2.50V
3.30V
5.00V
12.00V
Voltage Battery
Current System Temp
Current CPU Temp
CPU FAN Speed
CASE FAN Speed
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
Shutdown Temperature
Enables you to set the maximum temperature the system can reach before
powering down.
System Component Characteristics
These fields provide you with information about the systems current operating
status. You cannot make changes to these fields.

Frequency/Voltage Control

This item enables you to set the clock speed and system bus for your system.
The clock speed and system bus are determined by the kind of processor you
have installed in your system.
Phoenix – AwardBIOS CMOS Setup Utility
CPU Ratio
Auto Detect PCI Clk
Spread Spectrum
CPU Host/AGP/PCI Clock
CPU Voltage Regulator
↑ ↓ → ← : Move
Enter: Select
F5:Previous Values
PC Health Status
[Disabled]
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F6:Fail-Safe Defaults
Frequency/Voltage Control
[Auto]
[Enabled]
[Enabled]
[Default]
[Default]
+/-/PU/PD: Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
48
Item Help
Menu Level
F7:Optimized Defaults
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults