Table of Contents
Advertisement
PCI Master (OFF)
When set to Off, any PCI device set as the Master will not power on the
system.
PowerOn by PCI Card (Enabled)
Use this item to enable PCI activity to wakeup the system from a power
saving mode.
Wake Up On LAN/Ring (Disabled)
Use this item to enable LAN or modem activity to wakeup the system from a
power saving mode.
RTC Alarm Resume (Disabled)
When set to Enabled, the following two fields become available and you can
set the date (day of the month), hour, minute and second to turn on your
system. When set to 0 (zero) for the day of the month, the alarm will power on
your system every day at the specified time.
Press <Esc> to return to the Power Management screen.
IRQs Activity Monitoring
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
Primary INTR
IRQ 3
(COM2)
IRQ 4
(COM1)
IRQ 5
(LPT2)
IRQ 6
(Floppy Disk)
IRQ 7
(LPT1)
IRQ 8
(RTC Alarm)
IRQ 9
(IRQ2 Redir)
IRQ 10
(Reserved)
IRQ 11
(Reserved)
IRQ 12
(PS/2 Mouse)
IRQ 13
(Coprocessor)
IRQ 14
(Hard Disk)
IRQ 15
(Reserved)
↑ ↓ → ← : Move Enter: Select
F5:Previous Values
This screen enables you to set IRQs that will resume the system from a power
saving mode.
Set any IRQ to Enabled to allow activity at the IRQ to wake up the system
from a power saving mode.
Press <Esc> to return to the previous screen.
IRQs Activity Monitoring
[ON]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
+/-/PU/PD: Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
45
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults
Advertisement
Table of Contents
