Pc Health Status; Frequency Control - Syntax SV266A User Manual

Assign IRQ for VGA/USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB/VGA (if any) on
your system. Activity of the selected IRQ always awakens the system.

PC Health Status

On mainboards that support hardware monitoring, this item lets you monitor
the parameters for critical voltages, critical temperatures, and fan speeds.
Phoenix – AwardBIOS CMOS Setup Utility
Target Temperature
Shutdown Temperature
Vcore
+ 2.5V
+ 3.3V
+ 5V
+ 12V
3.3V Battery
System Temperature
CPU Temperature
CPU FAN speed
System Fan Speed
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ → → → → ← ← ← ← : Move Enter : Select +/-/PU/PD:Value:
ESC: Exit F1:General Help
F7:Optimized Defaults
Target Temperature (Disabled)
This item is for CPU Throttling switch. When the CPU reached it's target tem-
perature, the CPU Throttling will be activated. Enabling this item will protect
your CPU not to overheat, but it will reduce the CPU performance.
Shutdown Temperature (Disabled)
Enables you to set the maximum temperature the system can reach before
powering down.
System Component Characteristics
These fields provide you with information about the systems current operating
status. You cannot make changes to these fields.

Frequency Control

This item enables you to set the clock speed and system bus for your system.
The clock speed and system bus are determined by the kind of processor you
have installed in your system.
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
[Disabled]
[Disabled]
F10: Save
F5:Previous ValuesF6:Fail-Safe Defaults
Frequency Control
46
Item Help
Menu Level