Table of Contents
Advertisement
6.
Apply thermal grease to the top
of the CPU.
7.
Swing the locking lever down and hook it under the latch on the edge of the
socket.
8.
Snap the four retention legs of
the cooling fan into place
9.
Swing both lock levers on top of the cooling fan to their opposite sides to
secure the cooling fan on top of the heatsink.
10. Connect the CPU Cooling Fan
power cable to the CPUFAN1
connector.
•
To achieve better airflow rates and heat dissipation, we suggest that
Notes:
you use a high quality fan with 4800 rpm at least.
•
CPU fan and heatsink installation procedures may vary with the type
of CPU fan/heatsink supplied. The form and size of fan/heatsink may
also vary.
Cooling Fan
Heatsink
Retention Module
15
Advertisement
Table of Contents
