Advanced Bios Features - Syntax SVX400 User Manual

Advanced BIOS Features

This option defines advanced information about your system.
Phoenix – AwardBIOS CMOS Setup Utility
CPU L1 & L2 Cache
CPU L2 Cache ECC Checking
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
ATA 66/100 IDE Cable MSG
Typematic Rate Setting
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
Security Option
OS Select For DRAM > 64MB
HDD S.M.A.R.T. Capability
Report No FDD for WIN95
Video BIOS Shadow
Small Logo (EPA) Show
↑ ↓ → ← : Move
Enter: Select
F5:Previous Values
CPU L1 & L2 Cache (Enabled)
All processors that can be installed in this mainboard use internal level 1 (L1)
cache and level 2 (L2) cache memory to improve performance. Leave this
item at the default value for better performance.
CPU L2 Cache ECC Checking (Enabled)
This item enables or disables ECC (Error Correction Code) error checking on
the CPU cache memory. We recommend that you leave this item at the
default value.
Quick Power On Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your
system start up faster. You might like to enable this item after you are
confident that your system hardware is operating smoothly.
First/Second/Third Boot Device (Floppy/HDD-0/CD-ROM)
Use these three items to select the priority and order of the devices that your
system searches for an operating system at start-up time.
Boot Other Device (Enabled)
When enabled, the system searches all other possible locations for an
operating system if it fails to find one in the devices specified under the First,
Second, and Third boot devices.
Advanced BIOS Features
[Enabled]
[Enabled]
[Enabled]
[Floppy]
[HDD-0]
[CD-ROM]
[Enabled]
[Disabled]
[Disabled]
[On]
[Disabled]
[Disabled]
6
250
[Setup]
[Non-OS2]
[Disabled]
[Yes]
[Enabled]
[Disabled]
+/-/PU/PD: Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
31
Item Help
Menu Level
Allows you to choose
the VIRUS warning
feature for IDE Hard
Disk boot sector
protection. If this
function is enabled
and someone attempts
to write data into this
area, BIOS will show a
warning message on
screen and alarm beep
F1:General Help
F7:Optimized Defaults