Table of Contents
Advertisement
Controller core for high-speed signaling
•
Supports PCI-Bus Power Management Interface
Specification release 1.1
•
Legacy support for all downstream facing ports
Expansion
The mainboard comes with the following expansion options:
Options
•
Five 32-bit PCI slots
•
One 8xAGP slot
•
A Communications Network Riser (CNR) slot (AC97
interface only)
•
Two IDE connectors which support four IDE channels and
a floppy disk drive interface
•
IDE RAID 1, 0 supported by Promise PDC20265R
controller (optional)
The SVX400 is capable of Ultra DMA bus mastering with
transfer rates of 33/66/100/133 MB/sec.
•
Supports Ultra ATA100 drives and backward compatible
IDE RAID
with Ultra ATA66/33 & EIDE drives (identical drives
(optional)
recommended)
•
Supports IDE RAID 1(mirroring) or 0 (striping)
•
Supports UDMA 5/4/3/2/1/0, DMA 2/1/0, PIO 4/3/2/1/0
modes
•
Two independent IDE channels support up to four
UDMA/100/66/33 or EIDE drives
•
Provides high performance serial connectivity
IEEE 1394
•
Compliant with 1394 Open HCI 1.0 and 1.1 with DMA
(optional)
engine support for high performance data transfer via a
32-bit bus master PCI host bus interface
•
Supports 100, 200 and 400 Mbit/sec transmission via an
integrated 3-port PHY
•
Performs arbitration requesting, packet generation and
checking, and bus cycle master operations
10/100 LAN
The VT6103 is a Physical Layer device for Ethernet 10BASE-T
(optional)
and 100BASE-TX using category 5 Unshielded, Type 1
Shielded, and Fiber Optic cables.
•
Dual Speed – 100/10 Mbps
•
Half And Full Duplex
•
Meet All Applicable IEEE 802.3, 10Base-T and 100Base-
Tx Standards
•
Adaptive Equalizer
Integrated I/O
The mainboard has a full set of I/O ports and connectors:
•
Two PS/2 ports for mouse and keyboard
•
Two serial port
•
One parallel port
•
One MIDI/game port
•
Six USB ports (two backpanel ports, onboard USB
headers providing four extra ports)
•
Audio jacks for microphone, line-in and line-out
BIOS
This mainboard uses Award BIOS that enables users to
Firmware
configure many system features including the following:
•
Power management
•
CPU and memory timing
•
Modem wake up alarms
The firmware can also be used to set parameters for different
3
Advertisement
Table of Contents
