Table of Contents
Advertisement
IRQ Resources
The submenu allows you to individually assign an interrupt type for interrupts
IRQ-3 to IRQ-15.
Phoenix – AwardBIOS CMOS Setup Utility
IRQ-3 assigned to
[PCI Device]
IRQ-4 assigned to
[PCI Device]
IRQ-5 assigned to
[PCI Device]
IRQ-7 assigned to
[PCI Device]
IRQ-9 assigned to
[PCI Device]
IRQ-10 assigned to
[PCI Device]
IRQ-11 assigned to
[PCI Device]
IRQ-12 assigned to
[PCI Device]
IRQ-14 assigned to
[PCI Device]
IRQ-15 assigned to
[PCI Device]
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
PCI/VGA Palette Snoop (Disabled)
This item is designed to overcome problems that can be caused by some non-
standard VGA cards. This board includes a built-in VGA system that does not
require palette snooping so you must leave this item disabled.
Assign IRQ for VGA/USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB/VGA (if any) on
your system. Activity of the selected IRQ always awakens the system.
INT Pin1~4 Assignment (Auto)
Names the interrupt request (IRQ) line assigned to a device connected to the
PCI interface on your system.
Press <Esc> to return to the PNP/PCI Configuration screen.
PnP/PCI Configurations
+/-/PU/PD:Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
47
Item
Menu Level
Legacy ISA for devices
compliant with the original
PC AT bus specification,
PCI/ISA PnP for devices
compliant with the Plug
and Play standard whether
designed for PCI or ISA
bus architecture
F1:General Help
F7:Optimized Defaults
Advertisement
Table of Contents
