Pc Health Status - Syntax SV266AD User Manual

Base to set the start address of the memory you want to reserve for the ISA
expansion card. Use the second item Reserved Memory Length to set the
amount of reserved memory. Press <Esc> to close the Memory Resources
sub-menu.
PCI/VGA Palette Snoop (Disabled)
This item is designed to overcome some problems that can be caused by
some non-standard VGA cards. This board includes a built-in VGA system that
does not require palette snooping so you must leave this item disabled.
Assign IRQ for VGA/USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB/VGA (if any) on
your system. Activity of the selected IRQ always awakens the system.

PC Health Status

On mainboards that support hardware monitoring, this item lets you monitor
the parameters for critical voltages, critical temperatures, and fan speeds.
Phoenix – AwardBIOS CMOS Setup Utility
Target Temperature
Shutdown Temperature
Vcore
+ 2.5V
CPU Temperature
CPU FAN speed
System Fan Speed
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
Target Temperature (Disabled)
This item is for CPU Throttling switch. When the CPU reached it's target
temperature, the CPU Throttling will be activated. Enabling this item will
protect your CPU not to overheat, but it will reduce the CPU performance.
Shutdown Temperature (Disabled)
Enables you to set the maximum temperature the system can reach before
powering down.
System Component Characteristics
These fields provide you with information about the systems current operating
status. You cannot make changes to these fields.
PC Health Status
[Disabled]
[Disabled]
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F6:Fail-Safe Defaults F7:Optimized Defaults
44
Item Help
Menu Level