Table of Contents
Advertisement
IRQ/Event Activity Detect
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
PS2KB Wakeup Select
Power Button Lock
PS2MS Wakeup from S3/S4/S5
PS2KB WakeUp from S3/S4/S5
USB Resume from S3
VGA
LPT & COM
HDD & FDD
PCI Master
PowerOn by PCI Card
Wake Up On LAN/Ring
RTC Alarm Resume
x
Date (of Month)
x
Resume Time (hh:mm:ss)
IRQs Activity Monitoring
↑ ↓ → ← : Move
Enter: Select
F5:Previous Values
This item opens a submenu that enables you to set events that will resume
the system from a power saving mode.
PS2KB Wakeup Select (Hot key)
This option allows you to set hot key combination to turn on the system by
keyboard.
Power Button Lock (Enabled)
When this item is enabled, you can set the password to lock the system.
PS2KB/MS Wakeup from S3/S4/S5 (Disabled)
This option enables you to allow keyboard or mouse activity to awaken the
system from power saving mode.
USB Resume from S3 (Enabled)
When set to Enabled, the system power will resume the system from a power
saving mode if there is any USB port activity.
VGA (Off)
When set to On, the system power will resume the system from a power
saving mode if there is any VGA activity.
LPT & COM (LPT/COM )
When this item is enabled, the system will restart the power-saving timeout
counters when any activity is detected on the serial ports, or the parallel port.
HDD & FDD (ON)
When this item is enabled, the system will restart the power-saving timeout
counters when any activity is detected on the hard disk drive or the floppy
diskette drive.
IRQ/Event Activity Detect
[Hot key]
[Enabled]
[OFF]
[Disabled]
[Enabled]
[OFF]
[LPT/COM]
[ON]
[OFF]
[Enabled]
[Disabled]
[Disabled]
0
0 0 0
[Press Enter]
+/-/PU/PD: Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
44
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults
Advertisement
Table of Contents
