Completing The Installation - IBM eServer xSeries 440 Installation Manual

Completing the installation

Complete the following steps to finish the installation:
1. Put the right side of the cover in place first, and then put the left side in place.
2. Install the server in the rack cabinet. See the Rack Installation Instructions that
3. Connect the external cables and power cords; then, turn on the peripheral devices
Press down to latch the two halves of the cover in place.
came with your server for detailed information on how to install the server in a rack
cabinet.
and the server. See "Working with cables" on page 32.
Chapter 2. Installing options
31