IBM eServer xSeries 440 Installation Manual page 42

30
xSeries 440:Installation Guide
d. Rotate the SMP Expansion Module locking levers forward until the SMP
Expansion Module is securely fastened in place. See the following illustration.
Center plane
Locking
levers
e. Install the retention bracket.
Notes:
1) If there are two SMP Expansion Modules installed in your server, you
must install the retention bracket for each of the SMP Expansion Modules.
Be sure to install the bottom retention bracket first, then repeat steps 2a
through 2e for the top SMP Expansion Module.
2) If the server is going to shipped or moved over a long distance, you must
reinstall the shipping thumbscrews.
Cover
Handle