IBM eServer xSeries 440 Installation Manual page 41

e. Lift slightly on the locking levers and rotate them back until they stop.
Note: The illustrations in this document might differ slightly from your
hardware.
Locking
levers
2. Install the SMP Expansion Module into the server.
a. Lift the SMP Expansion Module by its handle and use the finger relief to hold
the SMP Expansion Module steady.
b. Being careful not to damage the components on the center plane, place the
SMP Expansion Module into the server.
c. Release the handle and slide the SMP Expansion Module toward the center
plane until it stops.
Handle
Locking
levers
Center plane
Handle
Chapter 2. Installing options
29