Assembly Instructions - Master cook CLASSIC 500 User Manual

4. Assembly instructions

Please read these instructions carefully before assembly and use.
Find a large, clean area to assemble your barbecue. Please refer to the parts list and assembly
diagram as necessary. Assembly of the barbecue involves many large components; it is
advisable to have two people assemble the unit.
Please use protective gloves when assembling this product.
To avoid losing any small component or hardware, assemble your product on a hard level
surface that does not have cracks or openings.
To avoid damage to soft floor or carpet, do not assemble or move the appliance on soft floor or
carpet.
Follow all steps in order to properly assemble your product.
Make sure all the plastic protection rip off before assembling.
Do not force parts together as this can result in personal injury or damage to the product.
When applicable, tighten all hardware connections by hand first, once the step is completed, go
back and full tighten all hardware.
Caution: Whilst every effort has made in manufacture of your barbecue to remove any sharp edge,
you should handle all components with care to avoid accidental injury.
STEP 1
Install the left mounting bracket (13) onto cart left panel (21) with two M5x12 bolts. See left-hand
picture below.
Install the right mounting bracket (32) onto cart right panel (26) with two M5x12 bolts. See right-hand
picture below.
13
21
M5 x 12 Bolts (2 pcs)
M5 x 12 Bolts (2 pcs)
8
32
26