Subscribe to Our Youtube Channel
Related Manuals for Master cook SRGG41628
Summary of Contents for Master cook SRGG41628
- Page 1 4 + 1 + 1 Burner Gas Grill Model No.: SRGG41628 Product size assembled: User Manual H1210 x W1480 x D565 mm 0063-20 Keep the instructions for future reference.
-
Page 2: Technical Data
Shinerich Industrial Ltd. 8/F, Noble Center, 1006 Fuzhong 3rd Road, Futian District, Shenzhen, China 0063-20 Product Name 4 + 1 + 1 BURNER GAS GRILL Model No. SRGG41628 17.67kW (G30:1286g/h, PIN Number 0063CT7097 G31:1263g/h) Main burners Qn : 11.72kW Back burner 2.45kW... -
Page 3: Before You Start
Before you start WARNINGS Do’s Read the instructions before using the appliance. Follow the KEEP THIS APPLIANCE CLEAN (follow instructions herein) - To help avoid fat flash fires/ flare ups and therefore possible injury steps in the order they are specified and please observe the or damage to property, it is vital that this appliance is clean safety warnings. -
Page 4: Further Information
Further information Proper use: The barbecue is a gas barbecue for outdoor use. It is designed Never use charcoal, lighter fluid, lava rocks, gasoline, kerosene, to be used exclusively in accordance with these instructions for or alcohol within this product. preparing foods that are suitable for barbecue cooking. - Page 5 DO NOT lean over the barbecue when igniting the gas flame. Assembly Close the valve on the gas bottle after each use: (Turn the valve clockwise). Also turn off the control knobs (Turn knob fully Please read these instructions carefully before assembly and clockwise).
- Page 6 Connecting and disconnecting the gas bottle Parts and tools needed than excluded The hose shall be approved according to EN16436 with sufficient length, allowing installation without any kinks (Length shall not exceed 1.5m). The hose shall be readily visible across its entire length for inspection after installation. Gas regulator should be approved according to EN 16129:2013 with proper capacity (g/h), pressure, working temperature and inlet + outlet connection for the country of destination.
- Page 7 Connecting and disconnecting the gas bottle Shutting off the gas bottle (Fig.2-A, 2-B) 7.6m. Or anti-clockwise rotate the nut on regulator G1 to release the into the barbecue. regulator G1. The appliance is designed to operate with a cylinder of Max. size Ø23.5 x 56 cm. Use a standard leak detector to ensure all connections are tight.
-
Page 8: Operation
Operation Warnings Before proceeding, make certain that you have assembled the 4, Place a match in the Match Holder appliance according to instructions. 5, Use the holder to slide the lit match though the cooking grates Use your Barbecue at least 100cm away from any wall or surface. or cooking griddle and the front of the heat tent to the left of the Never use your gas barbecue in a building, garage, shed, burner you wish to light. -
Page 9: Cleaning And Maintenance
Cleaning and maintenance Regularly clean your barbecue between uses and 3. Barbecue Body Regularly remove excess grease or fat from the barbecue body especially after extended periods of storage. with a soft plastic or wooden scraper. Ensure the barbecue and its components are sufficiently cool It is not necessary to remove all the grease from the body. -
Page 10: Troubleshooting
Troubleshooting PROBLEM POSSIBLE CAUSE PREVENTION/CURE Burner will not light Wires or Electrode covered with Clean wire and/or electrode with rubbing alcohol using igniter cooking residue Wipe dry with cloth Electrode and burners are wet Electrode cracked or broken – Replace electrode sparks at crack W ire loose or disconnected Reconnect wire or replace electrode/wire assembly... -
Page 11: Fixtures And Fittings
Fixtures and Fittings Components supplied (not actual size) Components supplied (not actual size) Description Visual Description Visual Hose and Regulator Asssembly Control Knob Bezel Warming Rack Control Knob Cast Iron Cooking Grate A Pulse Iginitor Round Cast Iron Cooking Grate Cast Iron Cooking Cylinder support Grate B... - Page 12 Fixtures and Fittings Components supplied (not actual size) Components supplied (not actual size) Description Visual Description Visual Small Control Knob Cart Horizontal Bar Bezel Door Handle Cart Left Panel Door Pivot Left Side Shelf Assembly Door Support Door Magnet Grease Tray Left Mounting Bracket Bottle Opener...
- Page 13 Fixtures and Fittings Fittings supplied (not actual size) Dimensions Visual M6 x 10 ST5.5 x 12 M5 x 12 M4 x 10 M3 x 10 M4 x 16...
-
Page 14: Getting To Know Your Product
Getting to know your product... - Page 15 Assembly instructions CC x 4 M5x12...
- Page 16 Assembly instructions EE x 2 M3X10 FF x 2 BB x 4 ST5.5 x 12...
- Page 17 Assembly instructions BB x 4 ST5.5 x 12 CC x 2 M5X12 CC x 4 M5X12...
- Page 18 Assembly instructions EE x 2 M3X10 FF x 2 GG x 4 M4X16...
- Page 19 Assembly instructions AA x 4 M6X10 AA Batery (Not included)
- Page 20 Assembly instructions CC x 4 M5X12 CC x 5 M5X12...
- Page 21 Assembly instructions GG x 2 M4x16 CC x 3 M5x12...
- Page 22 Assembly instructions CC x 2 M5x12...
- Page 23 Assembly instructions CC x 2 M5x12 DD x 2 M4x10...
- Page 24 Assembly instructions...
- Page 25 Assembly instructions 3-5mm...
- Page 26 Assembly instructions Grounding wire (4.8x0.8, 1pc) Igniter switch wire (4.8x0.8, 1pc) Igniting wire (2.8x0.8, 5pcs)
- Page 27 Assembly instructions...
- Page 28 Assembly instructions Description Visual Description Visual Motor Spining Ring Motor Bracket Fork M5 Nut Rear Spining Rod D5 Washer Counterweight M5 x 12 Screw Handle Front Spining Rod...
Need help?
Do you have a question about the SRGG41628 and is the answer not in the manual?
Questions and answers