Interface Grouping - SmartRG SR350N User Manual

Interface Grouping

Creating an interface group is used to map local interfaces to WAN interfaces. Typical application for this feature would include assigning IPTV
STBs to a WAN interface.
After selecting Advanced Setup -> Interface Grouping
next page will appear.
To create a new interface group:
1. Enter a unique Group Name
2. To automatically add LAN clients to a WAN Interface in the new group, add the DHCP vendor ID string. By configuring a DHCP vendor ID
string, any DHCP client request with the specified vendor ID (DHCP option 60) will be denied an IP address from the local DHCP server.
3. Select an interface from the
mapping of the ports. Hold down the shift key to multi-select. NOTE: These clients may obtain public IP addresses.
4. If this interface is to share the WAN interface, click the
select to be removed from any other interface groups.
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
from the left navigation bar, click the
then select either step 2. (dynamic) or step 3. (static) below:
Available Interface list and add it to the
Shared WAN Interface
Add button below the table. The screen shown on the
Grouped Interface list using the arrow buttons to create the required
box. Not checking this will cause the WAN interface you
67