Passwords - SmartRG SR350N User Manual

The individual fields on this screen are defined as follows:
Field Name
Services
LAN
WAN
WAN Port Number
Service Control List service: FTP
Service Control List service: HTTP
Service Control List service: ICMP
Service Control List service: SNMP
Service Control List service: SSH
Service Control List service: TELNET
Service Control List: TFTP

Passwords

Establish or alter the passwords associated with access to the Gateway. Three accounts are available to manage: Admin, Support and User.
After selecting Management -> Passwords
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
Description
[FTP, HTTP, ICMP, SNMP, SSH, TELNET, TFTP]
Specifies the SCL services that can be enabled or disabled via the Access Control configuration screen.
Specifies service enabled (via checkbox) on LAN side firewall.
Note: ICMP is an always-enabled service by default and has no checkbox.
Specifies service enabled on the WAN side firewall.
Specifies the port the access control applies to on the WAN side for the given service. See port
information below.
FTP Service access (For WAN this is with default port).
HTTP Service access (For WAN this is in association with port specified â€" default is port 80).
ICMP Service access (For WAN this is with default port).
SNMP Service access (For WAN this is with default port).
SSH Service access (For WAN this is in association with port specified â€" default is port 22).
TELNET Service access (For WAN this is with default port).
TFTP Service (as with default port) Access.
you enter your desired settings for one login.
106