Manual Setup; Network Authentication: Mixed Wpa2/Wpa-Psk - SmartRG SR350N User Manual

Field Name
Network Re-Auth Interval
WPA Group Rekey Interval
RADIUS Server IP address
RADIUS Port
RADIUS Key
WPA/WAPI Encryption
WEP Encryption
Encryption Strength
Current Network Key
Network Key 1-4

Manual Setup

Network Authentication: Mixed WPA2/WPA-PSK

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
Description
[1-65535 seconds] The frequency with which the gateway automatically updates the group key and sends it
to connected LAN client devices.
Enter the IP address for the Remote Authentication Dial In User Service server associated with your
infrastructure.
Port 1812 for authentication is a standard for RADIUS authentication per the IETF RFC 2865. Your RADIUS
deployment may differ from this. Older servers may use port 1645.
Enter the encryption key required to authenticate to the Radius Server specified via the Server IP address
above.
[AES, TKIP+AES] Choose from Advanced Encryption Standard (AES) or AES combined with Temporary Key
Integrity Protocol (TKIP). This field has been pre-populated with the option most complimentary to the
Network Authentication selected.
[Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.
[128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more robust option for
security.
[1-4] Select which of the four keys from the list is presently in effect.
Enter up to four encryption keys using the on-screen instructions to achieve the desired security strength
(128 or 64 bit).
87