Wireless Bridge - SmartRG SR350N User Manual

The individual fields on this screen are defined as follows:
Field Name
Select SSID
MAC Restrict Mode

Wireless Bridge

This page allows you to configure wireless bridge features of the wireless LAN interface. You can select
Distribution System) to disable access point functionality. Selecting
will still be available and wireless stations will be able to associate to the Access Point.
Selecting Disabled in Bridge Restrict will disable wireless bridge restriction. Any wireless bridge will be granted access. Selecting
Enabled(Scan) enables wireless bridge restriction. Only those bridges specified via their MAC address in Remote Bridges will be granted access.
After selecting Wireless -> Wireless Bridge
Click Refresh to update the remote bridges. Wait for few seconds to update.
Click Apply/Save to commit your changes.
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
Description
Select the SSID to apply this MAC filter rule to.
Disabled: MAC filtering is off.
Allow: For specified MAC address, access is permitted.
Deny: Access for the specified MAC address is rejected.
from the left navigation bar, enter your settings as desired.
Access Point enables access point functionality. Wireless bridge functionality
Wireless Bridge (also known as Wireless
Enabled or
89