Interface Grouping - SmartRG SR300n User Manual

Interface Grouping

Creating an interface group is used to map local interfaces to WAN interfaces. Typical application for this feature would include
assigning IPTV STBs to a WAN interface.
After selecting Advanced Setup -> Interface Grouping
shown on the next page will appear.
To create a new interface group:
1. Enter a unique Group Name
2. To automatically add LAN clients to a WAN Interface in the new group, add the DHCP vendor ID string. By configuring a
DHCP vendor ID string, any DHCP client request with the specified vendor ID (DHCP option 60) will be denied an IP address from
the local DHCP server.
3. Select an interface from the
create the required mapping of the ports. Hold down the shift key to multi-select. NOTE: These clients may obtain public IP ad-
dresses.
4. If this interface is to share the WAN interface, click the
interface you select to be removed from any other interface groups.
Click Apply/Save to commit. Your changes will be effective immediately.
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
from the left navigation bar, click the
then select either step 2. (dynamic) or step 3. (static) below:
Available Interface list and add it to the
Shared WAN Interface
Add button below the table. The screen
Grouped Interface list using the arrow buttons to
box. Not checking this will cause the WAN
Page 70
smartrg.com