Diagnostics; Fault Management - SmartRG SR350N User Manual

Diagnostics

After selecting Diagnostics -> Diagnostics
The table will be updated with fresh diagnostic information regarding connection integrity. There is significant in-line documentation regarding
each individual test. Simply click the
in the event that a particular test should fail.
The normal test method is initiated with the
Selecting the Test With OAM F4

Fault Management

Utilize this screen for diagnostics regarding your VDSL PTM or Ethernet WAN connection. Fault Management is compliant with IEEE 802.1ag for
Connectivity Fault Management.
After selecting Diagnostics -> Fault Management
Maintenance Domain (MD) Level, Destination MAC Address
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
from the left navigation bar, click the
Help link at the far right of each line item to learn more about what is being tested and what actions to take
Test button and utilizes OAM F5 loopback cells.
will conduct the test at the VP level in lieu of at an individual VC connection.
from the left navigation bar, select values for the
to test and enter the applicable (if any)
Test button at the bottom of the screen.
802.1Q VLAN ID.
94