Qos Port Shaping - SmartRG SR350N User Manual

Field Name Description
Destination MAC Address
Enter the destination MAC Address and destination MAC Mask applied to classification.
Destination MAC Mask
Source IP Address/Mask Enter the source IP Address and Source IP Mask applied to classification.
Protocol (Optional) Enter the Protocol specified for classification criteria.
(Optional) Enter the Source Port applicable for classification criteria. Expressed as a range or single port. (port:port
UDP/TCP Source Port
or port).
(Optional) Enter the Destination Port applicable for classification criteria. Expressed as a range or single port.
UDP/TCP Destination Port
(port:port or port).
Choose from available queues in the drop-down list.
Specify Class Queue Packets classified into a queue that exit through an interface for which a queue is not specified to exist, will instead
egress to the default queue on the interface.
Mark Applied
Differentiated Service Select the desired DSCP code from the drop down list.
Code Point
[1-7] (Lower values have higher priority.) This value is inserted into the Ethernet frame to be used by QoS disciplines
802.1P priority
to differentiate traffic.
Rate Limit (kbps) Data traffic rate limit applied to classification.

QoS Port Shaping

QoS Port Shaping facilitates setting a fixed rate (Kbps) for each of the Ethernet ports.
Select Advanced Setup -> Quality Of Service -> QoS Port Shaping
Click the Apply/Save button to commit the changes entered.
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
and the following screen will appear.
54