Security - SmartRG SR350N User Manual

Field Name
Disable WMM Advertise
Enable Wireless Multicast Forwarding
SSID
BSSID
Country
Max Clients
Enabled
SSID
Hidden
Isolate Clients
Disable WMM Advertise
Enable WMF
Enable HSPOT
BSSID

Security

Utilize this screen to configure security features of the wireless LAN interface.
You may configuration it manually or via Wi-Fi Protected Setup (WPS).
After selecting Wireless -> Security
Click Apply/Save to commit your settings.
NOTE: When both STA PIN and
If Hide Access Point is enabled or the MAC filter list is empty with "allow" c hosen, WPS2 will be disabled.
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
Description
Check to stop the wireless from advertising Wireless Multimedia (WMM) functionality.
WMM provides basic Quality of Service (QOS) for applications.
Check to enable Wireless Multicast Forwarding (WMF). Forwards multicast traffic across
wireless clients when enabled.
Enter the the Wi-Fi Service Set Identifier (SSID) here.
Enter the Basic Service Set Identifier (BSSID). Provides the MAC address assigned to the
wireless router.
Set the country in which the gateway is deployed.
[1-16] Define the maximum number of clients that can access the router wirelessly.
If desired, up to three virtual access points for guest use may be defined.
Check to Enable a virtual wireless access point for guest access.
Enter your desired wireless Service Set Identifier (SSID) here.
Check this option to hide the SSID from being broadcasted publicly.
Check to prevent client PC’s from communicating with one another.
Check to stop the wireless from advertising Wireless Multimedia (WMM) functionality.
Check to enable Wireless Multicast Forwarding (WMF).
Check to enable wireless Hotspot2.0
N/A
from the left navigation bar you may modify settings as desired.
Authorized MAC are empty, PBC becomes the default value.
79