Eth Interface; Wan Service; Ppp Over Ethernet - SmartRG SR350N User Manual

ETH Interface

Your gateway has four LAN ports. One of them can be re-purposed to become a WAN port when such an RJ45 WAN port is desired.
After selecting Advanced Setup -> Layer2 Interface -> ETH Interface
screen will appear. From the drop-down menu in the center pane, simply select the LAN port you wish to act as a WAN port.

WAN Service

There are several variations of WAN Service available to configure. The three core variations are:
PPP over Ethernet (PPPoE)
l
IP over Ethernet
l
Bridging
l
This chapter will illustrate a sample configuration scenario down each of these three variations and define the available fields to customize your
WAN service setup.

PPP over Ethernet

After selecting Advanced Setup -> WAN Service
Advance to the next after completing the required fields using the
First, select the Layer2 interface to use for the WAN service.
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
from the left navigation bar, click
from the left navigation bar, click the
Next button appearing near the bottom of each screen.
Add in the center pane. The following
Add button. A progression of several screens will follow.
24