Basic - SmartRG SR350N User Manual

Field Name
Last Member Query Interval
Robustness Value
Maximum Multicast Groups
Maximum Multicast Data
Sources (for IGMP v3)
Maximum Multicast Group
Members
Fast leave
LAN to LAN (Intra LAN)
Multicast
Membership Join Immediate
(IPTV)

Basic

This page allows you to configure basic features of the Wi-Fi LAN interface. You can enable or disable the Wi-Fi LAN interface, hide the network
from active scans, set the Wi-Fi network name (also known as SSID) and restrict the channel set based on country requirements.
After selecting Wireless -> Basic
Click Apply/Save to commit your settings.
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
Description
Enter the maximum response time within which the host must respond to the Out of Sequence query from the
router. (Default = 1000ms)
IGMP uses this value when router receives and IGMPv2 Leave report indicating at least one host wants to leave
the group. Upon receiving the Leave report, the router confirms the interface is not configured for IGMP
Immediate Leave. If not, the router sends the out-of-sequence query.
[2-7] Enter the value representing the complexity of the query. The greater the value, the more robust the
query.
Maxim number of groups allowed.
[1-24] Maximum data sources allowed.
The maximum number of multicast groups that can be joined on a port or group of ports.
[Enabled, Disabled] If enabled, the IGMP proxy removes group member immediately without sending a query.
Check this option to permit a multicast data source on the LAN side and IGMP snooping enabled.
When enabled, clients do not send a join report and will have faster join at startup but only by a few
milliseconds.
from the left navigation bar you may modify settings as desired.
77