Position Refresh - Benefon TRACK ONE Owner's Manual

locked, you can turn off the ringing
.
tone by pressing
U n l o c k i n g t h e k e y p a d
:
ö ;
FI Network
*
OPEN
.
1. First press the left soft key
2. Immediately after that press the right
-
soft key .
OPEN
If you have locked the keypad and set the
lights off, you can set lights on for 10 sec-
c
onds by pressing .
If you press the left soft key or
these 10 seconds, the lights will remain on
for another 10 seconds. The lights will turn
off 10 seconds after the last key is pressed.
That way, you are able to see how to unlock
the keypad even if it is dark.
38 QUICK MENU: POSITION REFRESH
QUIET.
H
Keypad
Locked
QUIT
! OPEN
-
.
.
OPEN
c
during

POSITION REFRESH

In this menu you can refresh the position
(i.e. update coordinates of your location).
The position is stored in the phone, it will
not be sent to the service center.
You can also request assisted GPS informa-
tion (AGPS) in order to speed up your posi-
tion calculation. However, before making
the request, make sure you have selected
number of satellites and stored the service
provider´s number in the phone. For fur-
ther information, please see the chapter
Main menu, GPS, GPS settings.
n
1. Press to open the quick menu and
find the Position refresh
-
2. Press to refresh the position.
SELECT
3. To request the assisted GPS informa-
-
tion, press
OK.
.
quest, press
NO.
quite accurate, the AGPS is not needed.
Please note that using this function might
increase power consumption.
menu.
To cancel the re-
If your position is