Sos Procedure - Benefon TRACK ONE Owner's Manual

Telematics
telematics settings, Emergency con-
firmation.

SOS PROCEDURE

PRESSING THE BENEGUARD BUTTON WILL:
• turn the phone on
• turn the GPS on
• start the emergency procedure (if no PIN or PUK
code are required).
The SOS procedure can always be started,
regardless of the state of the phone: in case
a call is in progress and you start the emer-
gency call, the currently active call will be
put on hold.
Please note that if there are missing emer-
gency numbers, false SOS presses, can-
celled SOS presses, busy telephone lines,
battery out-of-charge incidents, message
transmission errors or poor network cover-
age, the SOS message might not be sent or
an SOS call might not be made.
settings, Advanced
BENEGUARD-BUTTON: SOS MESSAGES AND SOS CALLS
SOS procedure when only sending short
message
1. Press the SOS button (
of the phone.
- Press and hold down the SOS button
or press the button quickly twice de-
pending on the instructions dis-
played.
2. At the same time when sending the mes-
sage, the phone sends the position in-
formation. If the
coordinates are not available, the previ-
ous coordinates will be sent instead.
3. If the Emergency confirmation
turned on, the phone will go on send-
ing the message until receiver of the
message sends the confirmation to your
phone.
4. As a sign of a sent SOS message, the text
SOS message sent
the sound of the emergency environ-
ment will be stopped.
<
) on the top
current position
setting is
will be displayed and
35