Cost Unit - Benefon TRACK ONE Owner's Manual

COST UNIT

Charging information is calculated and
stored as charging units. Units are indepen-
dent of any currency.
Use this option if you wish to read and set
price for unit. After completing the setting,
the call cost information will be displayed
in currency instead of units.
Price/Unit
FIM 2.000
QUIT CHANGE
-
1. If you wish to set or change the price
-
per unit, press
2. Key in the PIN2 code and press
Enter PIN2 code
_
QUIT
OK
-
CHANGE.
-
.
OK
Enter unit price:
1.000_
CLEAR
NEXT
-
.
3. Press to delete the characters
CLEAR
left to cursor. Key in the desired price
per unit To add a decimal point, press
.
+ -
. Press
NEXT.
4. The price per unit depends on your op-
erator. The price per unit can be set
higher than the actual charge, so that all
the extra costs will also be covered. In
case the price per unit is set to zero (0),
this feature is not in use.
5. Key in the desired currency, in which
the charges will be displayed. Use a 3-
letter abbreviation for the currency. By
n
using you can move the cursor to
point at the first letter of the abbrevia-
MAIN MENU: NETWORK SERVICES
Enter currency:
FIM_
OK
CLEAR
-
143