What To Do First; Send Position - Benefon TRACK ONE Owner's Manual

WHAT TO DO FIRST

In order to use telematics functions, such as

Send position

and
need to have a contract with the service
provider. The service provider will then
supply you with the user-id and initiate
telematics functions by sending the activa-
tion message. Initiation requires user iden-
tification, so you need to store the user-id
in your phone as soon as it is supplied. For
further information, please see the chapter
Main menu, Settings, Telematics settings,
Service user-id.
Before you start using the telematics func-
tions, also make sure that required telemat-
ics settings are done and essential phone
numbers stored properly in your phone.
Such numbers are:
1. Service center number
mation, please see the chapter Main
menu, Settings, Telematics settings, Ad-
vanced telematics settings.
Condition check , you
. For further infor-
2. SMS service number
mation, please see the chapter Memo,
Messages, Message setup.
The Telematics (functions),
telematics settings and
secured by a security code. For further in-
formation about the code, please see the
chapters Introduction, Vocabulary, Securi-
ty code and Main menu, Security, Security
code request and Change security code.
Send position
In this menu you can send your position to
the service center or to someone you de-
sire, e.g. a friend or relative. You can also
enclose a short message to go along with it.
If your position has changed since the latest
position calculation, you may refresh your
position before the sending. For further in-
formation, please see the chapter Quick
menu, Position refresh.
MAIN MENU: TELEMATICS
. For further infor-
Advanced
GPS settings can be
107