Reset Position; Coordinates - Benefon TRACK ONE Owner's Manual

Reset position

In this menu you can reset the position in-
formation stored in the phone. Resetting is
useful if the GPS has trouble reading and
calculating your current position: this
could happen in case the position has
changed quite a lot since it was last read.
When resetting position, the GPS must be
turned on.
-
Press to enter the
SELECT
menu. Confirm the reset by pressing
After a successful operation,
will be displayed.

Coordinates

-
Press to enter the coordinates
SELECT
menu.
The display will show the latest position if
it is less than 60 minutes old. A time differ-
ence to current is displayed on the upper
row of the display.
Note, that the latest known position will be
send with protocol messages no matter how
old it is.
The satellite symbol
indicates the accura-
cy of the position, i.e
the more bars the
better position.
Reset position
- If the GPS is in
OK.
Economy
it
Position reset searched and found
position, the position
is indicated with thin
bars.
If the GPS is turned off, position cannot be
viewed.
By pressing
date the position at once.
mode, and
has previously
-
, you can try to up-
UPDATE
MAIN MENU: GPS
UPDATE
UPDATE
149