Fm Radio Operation - Blaupunkt PP16DAB EDITION Owner's Manual

PP16DAB EDITION
To view further information
Each time you press INFO button, the next set of information will be displayed,
cycling through: DLS text, DL Plus information (this is only displayed if broadcast by
the station), signal strength,
programme type, ensemble name,
channel number/frequency, signal error rate,
bit rate, codec/DAB variant, time and date.
Note:
DL Plus presents additional information that can be broadcast by stations and stored
temporarily on your radio.
Dynamic range compression (DRC)
This function can optimize to adjust the output sound quality automatically
according to the input signal in order to get steady and nice sound output. For
example, there can adjust the sound louder if the input audio signal is small; and
modify the sound smaller if the audio signal is too loud.
Note:
DRC only works if it is enabled by the broadcaster for a specific station.
To change the DRC setting
Select Menu > DRC, then press
enter the DRC submenu.
Press ">" or "<" to select the available options:
DRC off, high, low.
DRC off: DRC is switched off.
DRC high: DRC is switched on; the default
setting recommended for noisy environment.
DRC low: DRC is set to half normal level.

FM radio operation

FM radio working frequency is 87.5~108MHz base on analogue signal; the radio
includes RDS (Radio Data System) function.
1. Fully extend the telescopic antenna.
2. Rotate the FUNCTION Selector to FM position
to enter FM mode.
3. Press and hold the "<"/ ">" button to search
the station, it will then stop and play the first
station its find automatically.
4. Short press "<" or ">" button to increase or decrease the radio frequency in
50KHz step by step for fine tuning.
Note: If the reception is too weak and there is noise on the received station, try to
improve the reception by changing the direction of the telescopic antenna, or move
the radio next to the window.
/ok button to
14