System Settings - Blaupunkt PP16DAB EDITION Owner's Manual

PP16DAB EDITION
b. The alarm sound can wake up in standby mode only; please do not switch off the
power by the left side of power ON/OFF selector after alarm setting, otherwise, the
alarm sound cannot work.
c. If the DAB or FM alarm type is selected, the alarm will turn on and broadcast the pre-
used station.
d. If the USB or SD alarm type is selected, the alarm will turn on and play the pre-used
track.
e. If the USB or SD alarm type is selected but the USB stick or SD card is absent, it will
switch to Buzzer alarm mode automatically.
f. When the alarm time is coming up, the alarm volume increase up gradually, and
the bell icon will flare on display.
g. Press and hold ALARM/SNOOZE button for 3 seconds to cancel the Alarm when it
is activated. And the alarm will ring up again when the time is coming on
tomorrow.
Snooze
When the alarm is activated (waking you),short
l
press the ALARM/SNOOZE button will cancel the
alarm sound and activate the snooze function. The
Snooze icon " "will show on the display. And you
will get another 10 minutes time for sleeping, and
ring up again after 10 minutes.

System Settings

How to enter this submenu
1. In DAB or FM model, short Press MENU button
then press ">" or "<" button" can scroll through
the submenu,
2. Press / OK button can select and enter into the option under submenu.
3. Press ">" or "<" button" can switch the selection, and press
button for confirmation.
Language Set
The system operation language can be selected
option as Polish/English/Czech/Deutsch/Italian
under system language menu. You can choose
the favorite language from the menu. The factory
default language is Polish.
Factory Reset
A factory reset can clear up all user defined
settings, replacing them with the original
default values, so time/date, DAB/FM station
list and preset stations will be lost.
If you select Factory Reset, a double confirmation
" YES" or " NO" will prompt ask you. Select " YES"
will perform the reset operation.
19
/ OK