Client Id; Phone Numbers - Tunstall liberty300 Installation Manual

Client ID

To program the client ID (four digits only):
Display Instruction
1. Press the HELP button to enter sub-menu.
2. Press the HELP button again to view programmed client ID, which will flash on
the status display. To view the client ID again, press the CANCEL and then HELP
button.
3. To change the client ID, press the HELP button to step through the digits (0-9, -).
To store each digit, press the CANCEL and HELP buttons together. The unit will
beep three times and display the next digit to be programmed. Repeat this
process until all four digits are programmed.
4. Press the CANCEL button to display the programmed client ID, which will flash
on the status display.
5. Press the CANCEL button to exit the sub-menu.

Phone numbers

To program control centre or personal recipient phone numbers (30 digits maximum):
Display Instruction
1. Press the HELP button to enter the primary control centre phone number sub-
menu.
2. Press the HELP button again to view programmed phone number, which will
flash on the status display. To view the phone number again, press the CANCEL
and then HELP button.
3. To change the phone number, press the HELP button to step through the digits
(0-9, t, H, -). To store each digit, press the CANCEL and HELP buttons together.
The unit will beep three times and display the next digit to be programmed.
Repeat this process until all digits (30 digits maximum) are programmed.
4. Press the CANCEL button to display the programmed phone number, which
will flash on the status display.
5. Press the CANCEL button to exit the primary number sub-menu.
Display Information
Star
Hash
Pause
1. Press the HELP button to enter the secondary control centre phone number
sub-menu and repeat steps 2-5 from the primary control centre sub-menu.
1. Press the HELP button to enter the primary personal recipient phone number
sub-menu and repeat steps 2-5 from the primary control centre sub-menu.
Page | 7
300
Tunstall Liberty installation manual v1.0