Tunstall liberty300 Installation Manual page 16

4. Press the CANCEL button to exit the inactivity restore sub-menu.
Display Programming option
Enabled
Disabled
Quiet
1. Press the HELP button to enter the quiet sub-menu.
2. Press the HELP button to select a programming option, as listed below.
3. To store an option selected, press the CANCEL and HELP buttons together. The
unit will beep three times and display the selected option.
4. Press the CANCEL button to exit the quiet sub-menu.
Display Programming option
Enabled
Disabled
Phone options
1. Press the HELP button to enter the phone options sub-menu.
2. Press the HELP button to select a programming option, as listed below.
3. To store an option selected, press the CANCEL and HELP buttons together. The
unit will beep three times and display the selected option.
4. Press the CANCEL button to exit the phone options sub-menu.
Display Programming option
Dials all numbers
Dials control centre
numbers
Answer call
1. Press the HELP button to enter the answer call sub-menu.
2. Press the HELP button to select a programming option, as listed below.
3. To store an option selected, press the CANCEL and HELP buttons together.
4. Press the CANCEL button to exit the answer call sub-menu.
Display Programming option
Auto-answer time
(minutes)
Page | 15
Information
Restores when an activity message is received from the
pendant or detector, or by the alarm CANCEL button.
Restores only by the alarm CANCEL button.
Information
Alarm beeps are silent and the unit will answer in listen
only mode. Note: This does not affect the hands-free
operation.
Quiet mode is disabled.
Information
Dials all programmed phone numbers.
Priority to programmed control centre numbers.
The unit will beep three times and display the selected option.
Information
Time after an activation where the alarm will auto-
answer any incoming call.
300
Tunstall Liberty installation manual v1.0