Tunstall liberty300 Installation Manual page 22

Saturday
Sunday
Days of the month, if ordinal is set to 0 (fixed date)
to
DLS start month
1. Press the HELP button to enter the DLS start month sub-menu.
2. Press the HELP button to select a programming option, as listed below. Note: If
ordinal is set to 0 (fixed), then days of the month are displayed at 0 to 31.
3. To store an option selected, press the CANCEL and HELP buttons together. The
unit will beep three times and display the selected option.
4. Press the CANCEL button to exit the DLS start month sub-menu.
Display Information
January to December
to
DLS end ordinal
1. Press the HELP button to enter the DLS end ordinal sub-menu.
2. Press the HELP button to select a programming option, as listed below. Note: If
ordinal is set to 0 (fixed), then days of the month are displayed at 0 to 31.
3. To store an option selected, press the CANCEL and HELP buttons together. The
unit will beep three times and display the selected option.
4. Press the CANCEL button to exit the DLS end ordinal sub-menu.
Display Information
First week of the month
Second week of the month
Third week of the month
Fourth week of the month
Fifth week of the month
Disabled
Fixed date
DLS end day
1. Press the HELP button to enter the DLS end day sub-menu.
2. Press the HELP button to select a programming option, as listed below. Note: If
ordinal is set to 0 (fixed), then days of the month are displayed at 0 to 31.
3. To store an option selected, press the CANCEL and HELP buttons together. The
unit will beep three times and display the selected option.
4. Press the CANCEL button to exit the DLS end day sub-menu.
Page | 21
300
Tunstall Liberty installation manual v1.0