Advertisement
19
Install glass to fan.
22
Remove cover by snaping off from top or bot-
tom. Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 / Eveready
A23 / GP 23A all 12V.Attach cover of remote by
placing over buttons and snap the battery cover
in place.
25
Attach front cover to wall control
with screws provided. Snap battery
cover in place.
© 2011 Monte Carlo Fan Company
20
Install glass to fan using the 3 ball
screws provided.
23
HAND HELD INSTALL
Place face plate over battery compartment and
buttons. Place remote over 2 pins on front cover.
Attach cover of remote by placing over 4 pins and
snaping into place.
5
21
Attach blade assembly to arms from
motor housing using screws and
washers provided. Tighten screws se-
curely.
24
WALL MOUNT INSTALL
Install wall control unit to outlet box
using machine screws provided.
3/2/2012
Advertisement
