Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Owner's Guide and Installation Manual
5HS52XXD-L/5HS52XXS-L Series Fan
UL Model No. : 52-ANT
Attach sales receipt to this card and retain as your proof of purchase
RETAILER NAME:
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
7.7kgs
17.0 lbs
Total fan weight with light kit
Advertisement
Related Manuals for Monte Carlo Fan Company 5HS52XXD-L Series
Summary of Contents for Monte Carlo Fan Company 5HS52XXD-L Series
- Page 1 Owner’s Guide and Installation Manual 5HS52XXD-L/5HS52XXS-L Series Fan UL Model No. : 52-ANT Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 7.7kgs 17.0 lbs Total fan weight with light kit...
- Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2013 Monte Carlo Fan Company 6/25/2013...
- Page 3 Note:If Installing The Secondary Support Safety Ball. This must be done to prevent the fan body from the bracket. Cable in the U.S., Do Not Remove Knockouts In rotating when the blades are in motion. The Outlet Box. © 2013 Monte Carlo Fan Company 6/25/2013...
- Page 4 Install rubber pad between fan Remove side covers from canopy exposing Pass leadwires and safety cable through 4 holes. 2 closed holes and 2 open “L” body and canopy. the canopy. shape holes. © 2013 Monte Carlo Fan Company 6/25/2013...
- Page 5 Tighten position. Install the other 2 screws included screws securely. Repeat this process 4 more in hardware bag and tighten all 4 securely. times until all blades are assembled. © 2013 Monte Carlo Fan Company 6/25/2013...
- Page 6 Remove finial nut, finial cap, hex nut, Install rubber washer and nut to 2 slot ear holes and 1 screw hole and and washer from fitter. glass tighten nut. twisting cap. Then tighten the 3 screws. © 2013 Monte Carlo Fan Company 6/25/2013...
- Page 7 Install finial cap and finial nut to glass and tighten finial nut. © 2013 Monte Carlo Fan Company 6/25/2013...
- Page 8 WARNING: Over lamping the fan will result in the fan lights shutting down until the proper wattage of bulbs are installed. Reset the lights by turning off the wall switch, breaker,or by remote. Replace bulbs with the correct wattage bulbs, turn the power on. © 2013 Monte Carlo Fan Company 6/25/2013...
- Page 9 Dec.2011 New formate Jan.2012 Update customer service phone number Jun.2013 Update for CUL regulation...