Advertisement
Quick Links
Owner's Guide and Installation Manual
3MO52XXO-L / 3MTR38XXO-L Series Fans
UL Model Number of 3MO52XXO-L: 52HH
UL Model Number of 3MTR38XXO-L: 38HH
Attach sales receipt to this card and retain as your proof of purchase
RETAILER NAME:
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
Total fan weight with light kit
Advertisement
Related Manuals for Monte Carlo Fan Company 3MO52XXO-L series
Summary of Contents for Monte Carlo Fan Company 3MO52XXO-L series
- Page 1 Owner’s Guide and Installation Manual 3MO52XXO-L / 3MTR38XXO-L Series Fans UL Model Number of 3MO52XXO-L: 52HH UL Model Number of 3MTR38XXO-L: 38HH Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com...
- Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Cutomer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2011 Monte Carlo Fan Company 12/28/2011...
- Page 3 Place the blade ring holder onto ing securely. cable through the rubber gasket the blades aligning the screw aligning the holes from the gasket holes from the blades and ring and yoke. holder. © 2011 Monte Carlo Fan Company 12/28/2011...
- Page 4 Make sure that when the safety cable is the fan to lock the ridges from the fully extended the leadwires are longer than the fan and mounting bracket in place. cable and no stress is placed on the leadwires. © 2011 Monte Carlo Fan Company 12/28/2011...
- Page 5 / GP 23A all 12V.Attach cover of remote by plac- cover. Attach cover of remote by placing over 4 ing over buttons and snap the battery cover in place. pins and snaping into place. place. © 2011 Monte Carlo Fan Company 12/28/2011...
-
Page 6: Fan Speed
To dim light hold down button “light dimmer”. The light will cycle from bright to dim to bright until button is released. Light will maintain last setting if turned off. © 2011 Monte Carlo Fan Company 12/28/2011... - Page 7 WARNING: Over lamping the fan will result in the fan lights shutting down until the proper wattage of bulbs are installed. Reset the lights by turning off the wall switch, breaker,or by remote. Replace bulbs with the correct wattage bulbs, turn the power on. © 2011 Monte Carlo Fan Company 12/28/2011...
- Page 8 Dec.2011 new format Jan.2011 Update customer service phone number...