Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
8ARR58XXD Series Fan
RETAILER NAME:
RETAILER ADDRESS:
UL Model NO. :MC1214
12.7 kgs
27.94 lbs
Total fan weight with light kit
Advertisement
Related Manuals for Monte Carlo Fan Company 8ARR58XXD Series
Summary of Contents for Monte Carlo Fan Company 8ARR58XXD Series
- Page 1 Owner’s Guide and Installation Manual 8ARR58XXD Series Fan UL Model NO. :MC1214 Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 12.7 kgs...
-
Page 2: Cautions And Warnings
All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2011 Monte Carlo Fan Company 11/25/2012... - Page 3 Keep the screws and washers. reinstall the 3 set screws and washers Remove preassembled keeper pin and removed in step 4. cross pin from downrod. Note: Do not over tighten the set screws. © 2011 Monte Carlo Fan Company 11/25/2012...
- Page 4 AC L. Connect all green grounded the lead wires. positions to have separate control. wires to Grounded wire from House. Make sure that no filaments are outside of the wire connectors. Insert the remote receiver into mounting bracket. © 2011 Monte Carlo Fan Company 11/25/2012...
- Page 5 Attach LED light kit onto light pan, aligning its keyhole slots with the preassembled set screws on light pan, twist clockwise till lock and reinstall the removed screw. Tighten all screws securely. © 2011 Monte Carlo Fan Company 11/25/2012...
- Page 6 Place remote machine screws provided. screws provided. Snap battery cover in over 2 pins on front cover. Attach cover place of remote by placing over 4 pins and snapping into place. © 2011 Monte Carlo Fan Company 11/25/2012...
- Page 7 WARNING: This fixture is not dimmable. Use only with on/off switch. Do not use in conjunction fan/light dimmable remote controls or light dimmers. Note: If not using for long periods of time, remove battery to prevent damage to remote transmitter, and store the remote transmitter away from excess heat or humidity © 2011 Monte Carlo Fan Company 11/25/2012...
-
Page 8: Troubleshooting
Trouble Shooting Warning Trouble Suggested Remedy CAUTION CAUTION CAUTION © 2011 Monte Carlo Fan Company 11/25/2012... - Page 9 Mar.2012...
Need help?
Do you have a question about the 8ARR58XXD Series and is the answer not in the manual?
Questions and answers