Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
8EER60XXD-V1 Series Fan
RETAILER NAME:
RETAILER ADDRESS:
ETL Model NO. : 8EER60(X)
11.1 kgs
24.42 lbs
Total fan weight with light kit
Advertisement
Related Manuals for Monte Carlo Fan Company Empire 8EER60 D-V1 Series
Summary of Contents for Monte Carlo Fan Company Empire 8EER60 D-V1 Series
- Page 1 Owner’s Guide and Installation Manual 8EER60XXD-V1 Series Fan ETL Model NO. : 8EER60(X) Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 11.1 kgs 24.42 lbs Total fan weight with light kit...
-
Page 2: Cautions And Warnings
All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2014 Monte Carlo Fan Company 12/2017... - Page 3 Note: If Installing The Secondary Support Connect plug from receiver to plug from Safety Cable in the U.S., Do Not Remove fan. Be sure plugs connection clasp Knockouts In The Outlet Box. together firmly. © 2014 Monte Carlo Fan Company 12/2017...
- Page 4 Install blade bracket with blade and top Reinstall the set screws remove in step 10. plate by 3 blade screws provided. Tighten Remove the gasket. screws securely. Repeat this process for remaining blades. © 2014 Monte Carlo Fan Company 12/2017...
- Page 5 LED light kit. the screw removed in step 14. Tighten all Note : If you don’t want to install the screws securely. fan with LED light, go to step 20 for blanking plate installation. © 2014 Monte Carlo Fan Company 12/2017...
- Page 6 LED light kit with the holes with the screw hole in light pan and Install on light pan. Reinstall the set screws it by turning clockwise till tight. removed in step 17. Tighten screws securely. © 2014 Monte Carlo Fan Company 12/2017...
-
Page 7: Transmitter Operation
Or you may turn power off for 15 seconds then turn power back, and then turn the fan on, Over load protection (current limit)- The device will limits the maximum current output from the receiver/drive when the fan or light load was increased abnormally. © 2014 Monte Carlo Fan Company 12/2017... - Page 8 4. When fan is turned on or operated forward/reverse function, it shutters & goes back & forth until it turns. It is a normal performance of this fan and it will take for few seconds to run this operation. © 2014 Monte Carlo Fan Company 12/2017...
-
Page 9: Troubleshooting
Trouble Shooting Warning Trouble Suggested Remedy CAUTION CAUTION CAUTION © 2014 Monte Carlo Fan Company 12/2017... - Page 10 Dec.2017 -V1 edition Jan.2018 change control number...