Setup Procedure - HP Z1 G2 User Manual

Setup procedure

1. The HP Z1 G2 Workstation weighs 19.2 kg (42.3 lbs) for the non-touch model and 21.0 kg (46.3
lbs) for the touch model, and must be removed from the box by two people.
WARNING!
always be lifted by two people to avoid personal injury due to product weight.
WARNING!
Plug the power cord into an AC outlet that is easily accessible at all times.
●
Disconnect power from the computer by unplugging the power cord from the AC outlet (not
●
by unplugging the power cord from the computer).
If your power cord has a 3-pin attachment plug, plug the cord into a grounded (earthed) 3-
●
pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin
adapter. The grounding pin is an important safety feature.
For more safety and regulatory information, refer to the
Notices located with the user guide on your computer.
2. Push the unit down to its lowest horizontal position.
CAUTION:
components may be damaged.
3. Slide the latches on the bottom of the workstation outward and open the chassis.
12 Chapter 3 Setting up and using the workstation
If a product is shipped in packaging marked with this icon
To reduce the risk of electric shock or damage to your equipment:
Never open the unit unless it is in the lowest horizontal position. Otherwise, system
, the product must
Regulatory, Safety and Environmental