Download Print this page

HP Z1 G2 Product End-Of-Life Disassembly Instructions

Hide thumbs Also See for Z1 G2:

Advertisement

Product End-of-Life Disassembly Instructions
Product Category: Workstations
Marketing Name / Model
[List multiple models if applicable.]
HP Z1 Workstation G2
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
MB
All types including standard alkaline and lithium coin
or button style batteries CR 2032
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries 0
Includes background illuminated displays with gas
discharge lamps LM270WQ1-SDG1
N/A
N/A
N/A
N/A
N/A
N/A
Include the cartridges, print heads, tubes, vent
chambers, and service stations. N/A
N/A
adaptor
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
1
1
0
1
0
0
0
0
0
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HP Z1 G2

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3 [System Parts] 1) Remove the stand a) Ready for stand remove b)take off stand cover c) Use T15 screw driver to disassemble the stand screw d) Take the stand leaving from Chassis e) stand disassembly finish 2) Remove TOP bezel a)push left and right side latch b) Open the top bezel c) disassembly LVDS cable...
  • Page 4 h)Pull the connector out of PCA i) Use T15 screw driver to j) Use T15 screw driver to disassemble disassemble the screw the screw k) Use T15 screw driver to disassemble l) remove Front bezel m) disassembly finish the screw 3)remove memory FAN a)Push memory latch.
  • Page 5 4) Remove the HDD a) Ready for HDD disassembly b)push HDD handle pull up the HDD carrier Pull HDD out of carrier latch Remove connector Disassembly SATA connector from c) Use T15 screw driver to Remove sensor from clip c) Use T8 screw driver to disassemble the screw disassemble the screw b) disassembly finish...
  • Page 6 5)Remove Cpu thermal module a) Use T15 screw driver to b)remove CPU thermal C)disassembly finish disassemble the screw 6)Remove ODD a)disassembly SATA connector b)push ODD latch c)remove ODD a) Press ODD carrier latch then pull b) disassembly finish it out. 7)Remove site IO board a) Use T15 screw driver to b)remove site io card...
  • Page 7 8)Remove rear IO board a) Use T15 screw driver to disassemble b)remove rear IO c)pull out connector from rear IO the screw board d) disassembly finish 9)Remove EMI CAN a) Use T15 screw driver to b)push out connector c) disassembly finish disassemble the screw 10)Remove speaker a) Use T15 screw driver to...
  • Page 8 11)Remove MXM power connector a) Use T15 screw driver to Remove MXM power connector disassemble the screw 12)Remove PSU a)push handle latch b) Turn the latch of PSU to C)disassembly connector downward d)remove PUS e) disassembly finish 13)Remove hinge& panel IO cable EL-MF877-00 Page 8 Template Revision B...
  • Page 9 a) Use T15 screw driver to disassemble the screw b)disassembly panel IO cable 14)Remover antenna a) Use T15 screw driver to b) remove aux antenna c)remove main antenna disassemble the screw 15)Remove MXM module a)press MXM latch b)remove MXM module c) Use T15 screw driver to disassemble the screw d)remove MXM heatsink...
  • Page 10 a) Pull the antenna aux cable out of b) c) Use T6 screw driver to c)remove WLAN card module PCIe short card disassemble the screw d) Use T6 screw driver to e) disassembly finish disassemble the screw 17)Remove MB a)ready for MB disassembly b)remove connector from MB C)remove LVDS cable from MB d)remove backlight cable from MB...
  • Page 11 h)remove power cable from MB i) remove MB 18) Remove CPU bracket/CPU a) Pull the latch lever and open the b) Take the CPU away from socket c) remove PCIe card bracket d) remove back plate 19)Remove memory a) Pull the latch spring and disassemble the Dimm 20)remove spring EL-MF877-00...
  • Page 12 a)cut cable clip g) Use T15 screw driver to disassemble the screw 21)Remove front bezel a) Use T15 screw driver to b)remove touch FPC cable disassemble the screw c)remove BKT d)remove front bezel e) disassembly finish 22)Remove web camera module a)Ready for web camera remove b) Use T15 screw driver to disassemble c)remove web camera module...
  • Page 13 d)remove left & right MIC phone and disassembly connector e) Use T5 screw driver to disassemble the screw f)disassembly connector g) disassembly finish 23)remove latch a) Use T15 screw driver to disassemble b) Use T15 screw driver to c)pull the spring structure to release the screw disassemble the screw the latch...
  • Page 14: Remove The Stand

    b) Use T15 screw driver to c)remove glass disassemble the screw [PSU] 1) Remove the stand a)PSU b)remove case screw c)open the case cover MAIN BODY SCREW(METAL) CASE d) cut off cable tie f) remove screw for PWB Internal dis-assemble g) remove handle from case h) remove PWB from case i) remove screw for FAN...
  • Page 15 j) Dis- assemble all component PSU dis-assemble overall EL-MF877-00 Page 15 Template Revision B PSG instructions for this template are available at EL-MF877-01...