Hardware - Tannoy i8 User Manual

8. Hardware

The i8 can be wall or ceiling mounted by using the CUB 8 bracket which is designed
to offer the maximum flexibility in selecting desired angles.
The CUB 8 is supplied with M8* bolts for fixing to the loudspeaker, hinge clips which
can be used to alter the angle of the wall fixing plate and an allen key to secure the
arm length adjustment as well as the desired angle of 'tilt' of the loudspeaker (vertical
axis).
The hinged wall mount plate enables the CUB 8 to be fixed to flat walls and ceilings
or to fit onto internal or external corners.
When the desired angle of tilt has been decided for the loudspeaker, the allen bolt
holding the loudspeaker mounting plate onto the arm of the CUB 8 can be tightened,
the sprockets will hold the assembly firm ensuring it will not slip. The arm length can
also be adjusted if desired. It is imperative that the bracket is fixed soundly to the
wall. Be sure to use the correct fixings (e.g. Rawbolt, Rawplug) according to the wall
type.
As there are four M8 inserts on the back of the i8 (see dimensions) the loudspeaker
can be mounted either horizontally or vertically using the CUB 8 bracket.
*1/4" UNC bolts are also supplied with the CUB 8 these are not required for use with
the i8.
CUB 8 BRACKET